|
CHECK OUT THESE FEATURES !
In addition to the standard EDM series features
- Automatically
indexing illuminated "dot" for digitally
indicating cylinder information
- A
missing bar for indicating CHT trend information.
- Step
button for indexing digital information forward or
backward, and stoppable in the automatic mode.
- The
TIT columns are in the center for quick comparison
of both engines.
- 14
distinguishable columns.
- Digital
display for accuracy and "long term trend monitoring."
- The
LF, or Lean Find mode automatically finds the first
cylinder to peak.
- Computer
assisted diagnostics for troubleshooting entire system.
- In
normalize mode the graphics resolution of each bar
column is 10º F.
- One
degree temperature resolution with selectable º C
or º F.
- Supplied
with JPI's well known, grounded and super reliable "fast response" probes.
- Three
year electronics warranty.
- Made
in California, USA.
- Fuel
Flow now available!
By
running your engine at peak performance levels, you
will attain maximum efficiency! Maximum efficiency translates
into a substantial savings in Fuel consumption and aircraft
engine maintenance. For more detailed information on
the EDM-760's unique operation and functions, please
refer to the EDM-700 page, as they operate essentially
in the same manner and have many of the same functions
and options.
JPI's
EDM-760 TWIN allows pilots to have reliable information
they can monitor for efficient and safe flying at their
fingertips, just like all the instruments in the EDM
series.
However,
now with the EDM 760 Twin, both engines can be running
at optimum levels, thus protecting the engine from damage,
and saving money in fuel and repairs--but above all,
the EDM 760 gives pilot's the information they require
for flying safely and knowing that they have the information
needed to get where you want to go without any worries.
The EDM-760 Twin now has the
long awaited "OVER LEAN" capability, just
like the well known feature on both the EDM-700 and
the EDM-800.
All you need to do to add this function is send in your
instrument for a software upgrade and recalibration,
and it costs ONLY $100!
|
